ShapeOko CNC Mill Project Running Total Cost

I’m building a ShapeOko CNC mill and this post will document my expenses.

Purchased from Inventables.com:

Date Item Cost
 2/10/13 Shapeoko Kit $225.00
 2/10/13 (2) 1000mm MakerSlide Rails (to increase Y axis length) $43.68
 2/10/13 8 ft Neoprene belting $15.92
 2/10/13 Plastic Toothed Pulley (for dual-Y drive) $5.50
 2/10/13 (4) NEMA 17 Stepper Motors $67.76
 2/10/13 (2) Idler Pulley (for dual-Y drive) $11.50
 2/10/13 1/4″ Nylon Spacers $2.00
Total (including shipping) $393.51

Purchased from DigiKey:

Date Item Cost
 2/10/13 24V 4.5A Power Supply $30.50
 2/10/13 (6) Optical Limit Switches $8.64
Total (including tax & shipping) $55.82

Purchased from Synthetos:

Date Item Cost
2/10/13  GRBL Shield/Arduino combo (including shipping) $95.79

Purchased from Amazon:

Date Item Cost
2/15/13 Emergency Stop Switch $6.69

Hardware Store:

Date Item Cost
2/21/13 4 feet of 1/8″ x 1/2″ mild steel bar $5.00
3/1/13 2′ x 4′ sheet 3/4″ MDF $11.00
3/1/13 75 1/4-20 tee-nuts $15.00

Purchased from McMaster-Carr:

Date Item Cost
2/21/13 (8) Threaded Standoffs (for moving the motors to the outside) $10.30
2/21/13 (3) Push buttons (assorted colors) $43.02
2/21/13 Toggle switch $20.03
2/21/13 (25) 5mm x 70mm SHCS $3.83
2/21/13 (2) 25mm long spacer (for double X axis mod) $2.48
2/21/13 (2) 51mm long spacer (for double X axis mod) $3.38

Upgrades:

Date Item Cost
 3/29/13 Z-Axis Upgrade Kit $65.00
 9/15/13 Shielded wire for re-wiring $40.00
12/06/13 40mm spacers $10.26
12/06/13 13mm spacers $8.58
12/20/13 Upgraded motor mount plates (4) $37.00

Current total expenditure: $820.00

All ShapeOko CNC Mill posts.

%d bloggers like this: